CABLES    ●    CABLE CARE    ●    HOME    ●    CONTACT

NEW from WHITE ZOMBIE AUDIO! The WHITE ZOMBIE AUDIO ZeroPointZero - solid silver sleeved in pure Teflon XLR balanced audio interconnect cables.

I connected the White Zombie zero pt zero xlr interconnects between my Cary V12 tube amp and Classe' 47.5 preamp. Please note that I was not expecting to hear a difference because I do not put much stock in esoteric cables and tweaks. However, as an electronics technician, I can appreciate that silver is a superior conductor over copper and was willing to give it a shot.

Well, to my delight, my Martin Logan Ascents seemed to get taller and wider e.g. the soundstage got much bigger.

In addition, the White Zombies have far better resolution. The better resolution was evident as I listened to uncanny lifelike cymbals and piano that I thought was in the room with me. Every time I switched back to the Monster Cables, I found new differences (congested, colored, boring, etc). Try Eva Cassidy's CD "Time After Time." I sat there listening with a big grin on my face knowing that these cables single-handedly improved my system more than my technical mind can reason. The zero pt zero appears very well built - better than the Kimber KCAG which I use between my CD player and preamp. Thanks for providing us a great product at a bargain price. I think this is the steal of the decade in interconnects.

Everyone considering KCAGs should consider these. Note that my system is an extremely revealing one. I can't say that everyone will have the same great results I did, but at this price, anyone can afford to squeeze every inch of hifi out of their gear.

Let me know if I can help you sell these in my area. I am a member of the Richmond Audio Society and have dozens of good connections (pun intended).

Thanks Again,

John Landry

NEUTRIK NC3FX-BAG XLR - The worldwide accepted standard. Rugged diecast shell, compact design (shortest available XLR cable connector).  Neutrik unique chuck-type strain relief. Black metal housing and silver contacts.

TECHNICAL DATA

Electrical

 ■ Number of contacts: 3
 ■ Contact resistance: = 3 mΩ
 ■ Insulation resistance - initial: > 2 GΩ
 ■ After damp heat test: > 1 GΩ
 ■ Dielectric strength: 1500 V dc
 ■ Rated current: 3 pole: 16 I [A], 2.5/14 mm²/AWG, = 4 C
   I = Rated current per contact
   C = Capacitance between contacts

Mechanical
 ■ Lifetime: >1000 cycles
 ■ Insertion / withdrawal force: = 20 N

Connector Materials
 ■ Shell: ZnAI4Cu1, gal Ni or black Cr over Cu plating
 ■ Insert: PA 6.6 30% GR (glass reinforced)
 ■ Contacts: - female (3 pole): CuSn6 & male: CuZn39Pb3
 ■ Contact surface: gal 2 µm Ag or gal 0.2 µm Au hard alloy over 2 µm Ni
 ■ Latch lock: St3K32 (latch) / CK 67 (spring)
 ■ Strain-relief clamp: POM
 ■ Antikink bushing: PUR
 
Environmental
 ■ Temperature range: -30° C to + 80° C
 ■ Flammability: UL 94HB
 
Conductors
 ■ Solid 99.99 26AWG silver.

Insulation
 ■ 17AWG thick-walled Zeus extruded virgin PTFE Polytetrafluoroethylene Teflon® tubes
 ■ On the atomic level, a PTFE molecule resembles a carbon rod encased in a sheath of fluorine atoms. These atoms form a strong and continuous shield around the carbon-carbon bonds, providing it with chemical resistance and stability. This atomic make-up is what imbues PTFE with its key properties:
 ■ High continuous service temperature (260ºC)
 ■ Very lubricious - lowest coefficient of friction of any polymer
 ■ Chemical and solvent resistance
 ■ Non-capacitance electrical resistance
 ■ High melting point (342ºC/648ºF)  (Complete summary of properties pdf)

Dielectric
 ■ Air

Termination
 ■ WBT® 4-percent German-made silver solder

IN ADDITION: The LITZ TRI-BRAID geometry effectively eliminates RF and EMI noise. These are VERY detailed and dynamic cables. There is no shield or jacket because they add nothing to the sonics of these cables (therefore, they take nothing away, either). The thick-walled Teflon tubing is tougher and more abrasion resistant that ANY other available jacketing material other than Kevlar®

These cables, as are all of our products, are worthy of the most sophisticated audio equipment made on this or any other planet. If you want a pair of high end cables with gas infused goo squirted inside the insulation; wires supposedly made from voodoo blends of precious metals, cables soaked in liquid nitrogen or a stroll down the midway at a sleazy carnival... THESE CABLES ARE NOT FOR YOU.

But if you want an extended high frequency with lush midrange and full bass, the ZeroPointZero can deliver. The soundstage is wide and deep. And you'll notice details like drum brushes on cymbals, the attack and decay of notes and the richness of your music you never thought possible from such an affordable pair of cables.

The time has come to put all the questionable voodoo bulls*#^ aside that's been running rampant of late and get back to some solid electrical engineering principles. Truth is: NOTHING is GAINED with many of the just plain ignorant things being done to audio cables nowadays. Science is science.

PAY BY CREDIT CARD USING PAYPAL!
Shop Without Sharing Your Financial Information!

When you pay with PayPal, your credit card and bank numbers are never seen by the seller or merchant. Your financial information stays safe. Plus, you're protected 100% against unauthorized payments sent from your account.
Priority Mail Shipping$10 SHIPPING ANYWHERE
IN THE FREE WORLD SERVED
BY THE UNITED STATES
POSTAL SERVICE!

($10 first pair plus $5 each additional pair in same shipment)

.5 meter pair ZEROPOINTZERO audio cables - $118.00

1.0 meter pair ZEROPOINTZERO audio cables - $128.00

1.5 meter pair ZEROPOINTZERO audio cables - $148.00

2.0 meter pair ZEROPOINTZERO audio cables - $168.00


ALL PRODUCTS   ●   NOSFERATU CABLES   ●   LA CACANYA CABLES   ● EL CHUPACABRA CABLES

HOME   ●     CABLE CARE   ●   FAQ   ●   CONTACT

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE